AmandaJaneDesigner

Costume and Graphic Design

Loki Helmet – Redo

2 Comments

After that horrible first attempt at Christmas, I started over again in February. This time, I decided to build my own wire frame from scratch. I picked up a spool of cheap steel wire from the hardware store. I made sure it was stiff enough that it would hold it’s shape while I work.

I started with a hoop that fit comfortably around my head, like the band of a hat. I then glued an arc over the top of my head, joining the very front and the very back of the hoop. This would hold that hoop at the correct height on my head.

Once I had this basic interior size figured out, I could start building the exterior. Special note: After each session of work, I would test fit the helmet to make sure it still fit and was easy to put on and remove. This way, if anything was out of place, I could fix it before moving onto the next step.

wire frame 1

I cut six wires for the horns, three for each. These I curved into the shape I wanted, and glued together. I kept the bottom ends long, to secure them to the base.

To keep their shape, I started at the tip of each horn, working down toward the base, gluing pieces of foam in between the wires, like spacers.

wire frame 2

With the horns secure and somewhat solid in their shape, I glued them in place on the helmet. Using fabric to bridge some of the gaps, I glued everything together. The fabric provided strength where paper would not, but was more flexible than foam sheets.

With the basic shape now constructed out of wire, foam, and fabric, I could begin layering the paper mache.

wire frame 3

The fronts of the horns were too angular, and I wanted to smooth them out. To do this, I cut strips of foam and glued them to the front face of each horn. This effectively rounded out the front without adding too much weight.

wire frame 4

The next step is to keep layering paper mache over the wire/fabric/foam structure until the outer surface is smooth. More on that next time!

Advertisements

Author: DizineGrl

Designer, Creator, Cat Lady, Builder of Cool Things, Dancer, Lover of Music.

2 thoughts on “Loki Helmet – Redo

  1. How thick of wire did you use

    • I don’t remember how thick the wire was, sorry! It was a spool of stainless steel wire at the hardware store, and was reasonably stiff. I want to say it was maybe 18G? Mainly, you will want to use something that is strong enough to support what you will be putting on it. Because I used paper mache, it was fairly light.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s